FLX.IDE Windows Network Ethernet Connection Setup

This tutorial covers setting up the network for Microsoft Windows.

We recommend connecting to the arm using a dedicated ethernet connection to start.  This requires configuring your network adapter to use a specific IP address.  To begin, open the Windows Control Panel and navigate to the "Network and Internet" panel.

Click the "View network and status tasks".

Click "Ethernet".

Click the "Properties" button.

Select "Internet Protocol Version 4" and click the "Properties" button.

Click the "Use the following IP address" radio button and enter in the information below and press "OK".

Plug an ethernet cable between the ethernet port on your server to the ethernet port on the arm.  You do not need a cross-over cable.